99色人,青青草欧美在线,337P大胆啪啪私拍人体

How does tall space industrial plant avoid dust in heating?

time：2024-03-08
hits：1243次
source：正弘奧能

The heating of industrial buildings in China has been using the traditional convection heating model such as radiators, but with the continuous development of society, the form and scale of industrial buildings have also been greatly developed, and the original traditional convection heating method has also revealed its drawbacks. First of all, the space of the single building is large, and the traditional convection heating methods such as radiators and heaters are difficult to meet the design temperature requirements. Secondly, the height of the building is high, and the phenomenon of the traditional convection heating method is serious. In particular, many industrial products will produce a large amount of fine dust in the production process, and the traditional convection heating method causes wind disturbance, and the dust flying in the workshop has an impact on the production process and directly affects the quality of the product. Examples include: 
 
· There is a lot of wood dust inside the wood furniture grinding workshop and woodworking workshop, which has caused considerable trouble to industrial production and workers' construction. 
· Polishing powder, metal powder and fibrous dust will be produced in the metal processing workshop, and the dust in the metal processing workshop is combustible dust. 

	· A large amount of fine dust of flour is produced in the flour mill, and when it reaches a certain high concentration, it will burn up in an instant, forming a violent dust explosion.


	 


	<img src="http://www.qxtxbbs.cn/Uploads/image/20240308/20240308095656_43636.png" alt="" />

 
Therefore, after more than ten years of actual use experience, we believe that: hot water radiation panel as a heating method of tall space industrial workshops is an ideal heating method. Practice has proved that the hot water radiant panel heating technology has no fan operation, no noise, no air disturbance, quiet operation, and avoid the phenomenon of air convection. Even in places where the smoke is relatively large, the staff will feel warm and comfortable. 
 

	At the same time, the hot water radiation panel can well solve the problem of unreasonable temperature distribution in the tall space, theoretically save 30% ~ 50% energy than the convection heating method, and can achieve room temperature and time-sharing, subregional control, and the economy is very obvious. Therefore, hot water radiant panel heating technology is very suitable for all kinds of industrial plants, maintenance warehouses, warehousing, large stadiums and exhibition halls and other buildings with tall space.


	 


	<img src="http://www.qxtxbbs.cn/Uploads/image/20240308/20240308095706_43057.png" alt="" />

 
ECOPAN hot water radiation panel promoted and sold by Beijing Leadway Power Co., Ltd. is prefabricated into a standard length of 3 meters and 6 meters in the factory (special requirements can be prefabricated into 2 meters and 4 meters). Each radiant panel can be connected by quick joint or welding. Each radiant panel and collection pipe is prefabricated in the factory and tested for safety. The bracket of the suspension plate is welded together with the radiant plate, one per meter, which greatly guarantees the flexibility of the installation. 
 
ECOPAN hot water radiation panel does not need electrical equipment, no flammable parts, hot water as a heat transfer medium, does not increase the fire rating of the building. It can be used in volatile and flammable built environments without the risk of fire and explosion. And the hot water radiation panel has a long service life and low maintenance cost.

久久久国产成人_日本一区二区三区四区在线观看_尤物国产_成人久久免费_91黄色免费网站_成人h版

How does tall space industrial plant avoid dust in heating?